Valves

Suite 9, Red Tree Business Suites, 24 Stonelaw Road, Rutherglen, Glasgow, G73 3TW

Tel +44 (0)141 613 2138

Knife Gate Valves


bc series

The BC model knife gate is a square port low-pressure valve for solid loaded fluids.
 
Sizes:
From DN 150 x 150 to DN 600 x 600 (other dimensions on request)
 
Working pressure:
150 x 150 to 600 x 600: 1 kg/cm²
For higher pressure: Casted bodies (on request)
 
Directives:
DIR 98/37/CE (MACHINES)
DIR 97/23... READ MORE >

bt series

The BT model knife gate is a bi-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications.
 
Sizes:
DN 2″/50 to DN 24”/600 (larger diameters on request)
 
Working pressure:
DN 2″/50 to DN 24”/600: 150psi / 10kg/cm2
 
Standard flange connection:
ANSI B16.5... READ MORE >

bx series

The BX model knife gate is a bi-directional wafer valve specifically designed for the isolation of pulverized coal burner lines on coal fired boilers during maintenance.
 
Sizes:
DN 700 to DN 1000 (Smaller and larger diameters on request).
Working pressure:.
DN 700 to DN 1000: 3 bar
Standard flange connection:
DIN PN 10.
 
The BX v... READ MORE >

cr series

The CR model knife gate is a heavy duty valve designed for handling difficult applications.
 
The two piece body with round inlet and square outlet (larger than the inlet) assures non-jamming.

 
Sizes:
DN 100 to DN 600 (larger diameters on request)
 
Working pressure:
DN 100 to DN 400: 7 kg/cm²
DN 500 to DN 600: 4 kg/cm²READ MORE >

dt series

The DT model knife gate is double gate valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or contaminated media.
 
In open position, both gates retract into the body and allow full flow. When closing, the gates push stock and contaminants as staples, wires… out of the body into the flow.
St... READ MORE >

eb series

The EB model knife gate is a bi-directional valve designed for general industrial service applications.
 
Sizes:
DN 50 to DN 1200 (larger diameters on request)
 
Working pressure:
DN 50 to DN 250: 10 kg/cm²
DN 300 to DN 400: 6 kg/cm²
DN 450: 5 kg/cm²
DN 500 to DN 600: 4 kg/cm²
DN 700 to DN 1200: 2 kg/cm²
 
READ MORE >

EK Series

The EK model knife gate is a uni-directional wafer valve designed for general industrial service applications.
 
Sizes:
DN 50 to DN 800 (larger diameters on request).
 
Working pressure:
DN 50 to DN 250: 10 kg/cm²
DN 300 to DN 400: 6 kg/cm²
DN 450: 5 kg/cm²
DN 500 to DN 600: 4 kg/cm²
DN 700 to DN 800: 2 kg/cm²
&nbs... READ MORE >

et series

The ET model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI-TIS 405 for industrial service applications.
 
Sizes:
DN 2″/50 to DN 36″/900 (larger diameters on request)
 
Working pressure:
DN 2″/50 to 24″/600: 150 psi (10 kg/cm²)
DN 30″/750: 100 psi (7 kg/cm²)
DN 36&... READ MORE >

ex series

The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications.
 
Sizes:
DN 50 to DN 1200 (larger diameters on request)
 
Working pressure:
DN 50 to DN 250: 10 kg/cm2
DN 300 to DN 400: 6 kg/cm2
DN 450: 5 kg/cm2
DN 500 to DN 600: 4 kg/cm2
DN 700 to DN 1200: 2 kg/cm2
 READ MORE >

hb series

The HB model knife gate is a bi-directional valve designed for general industrial service applications.
 
Sizes:
DN 50 to DN 300 (larger diameters on request)
 
Working pressure:
DN 50 to DN 300: 16 kg/cm²
 
Standard flange connection: DIN PN 16 (Others on request)
 
Face to face dimensions acc. EN558-1 serie20 (DI... READ MORE >

featured

Orbinox KP valve provides isolation of an instrument level transmitter from a storage tank. Installation of this valve allows for transmitter replacement or maintenance without disruption of the process or draining of the vessel.
 
Sizes:
DN 80
 
Standard flange connection:
PN10 / ANSI 150
 
Tank side:
see pag. 4
 <... READ MORE >

featured

The TH model knife gate is a through conduit high pressure wafer valve designed for media with high consistency.
 
Sizes:
DN 300 to DN 1000 (larger diameters on request)
 
Working pressure:
DN 300 to DN 800: 10 (kg/cm²)
DN 900 to DN 1000: 6 (kg/cm²)
 
Standard flange connection:
DIN PN10
Note:
other flange ... READ MORE >

tk series

The TK model knife gate is a bi-directional wafer valve designed for media with high consistency.
 
Sizes:
DN 50 to DN 1000 (larger diameters on request)
 
Working pressure:
DN 50 to DN 125: 10 kg/cm2
DN 150 to DN 250: 8 kg/cm2
DN 300 to DN 400: 6 kg/cm2
DN 450: 5 kg/cm2
DN 500 to DN 600: 4 kg/cm2
DN 700 to DN 1000: 2 k... READ MORE >

tl series

The TL model knife gate is a through conduit wafer valve designed for media with high consistency.
 
Sizes:
DN 50 to DN 1000 (larger diameters on request)
 
Working pressure:
DN 50 to DN 125: 10 (kg/cm²)
DN 150 to DN 250: 8 (kg/cm²)
DN 300 to DN 400: 6 (kg/cm²)
DN 450: 5 (kg/cm²)
DN 500 to DN 600: 4 (kg/cm²)
DN 700... READ MORE >

featured

The VG model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off.
 
Sizes:
DN 50 to DN 900 (larger DN on request)
 
Working pressure:
DN 50 to DN 400: 10 bar
DN 450 to DN 600: 6 bar o 10 bar
DN 700 to DN 900: 5 bar
Note: higher working pressures... READ MORE >

featured

The XC model knife gate is a wafer valve designed for industrial bulk handling service applications (powdered and granular products).
 
Sizes:
DN 50 to DN 600 (larger diameters on request)
 
Working pressure:
Of seating:
DN 50 to 250: 3 kg/cm²
DN 300 to 400: 2 Kg/cm²
DN 450: 1,5 kg/cm²
DN 500 to 600: 1 kg/cm²
 ... READ MORE >